anybody know how to bed in ferodo ds3000 pads,running them on a eg6 civic with brembo 4 pots

any tips would be a great help
thanks in advance
Garrett

If you get up to about 4th gear, say 4000 rpm... somewhere she has power to pull while you left foot brake... apply the brake while still holding the throttle, the gradually put more pressure on the brake and gently release the throttle... this should all be done in a smooth motion, not jumpy... do this about 3 times and then drive for about a km to allow the brakes to cool. Maybe repeat 3 more times, after this you will notice a good brake feeling. DO NOT bed new pads with new discs and if you change compound or pad always remember to sand up your discs before you use the different pad. if you heard someone that knows how to do it this way then youd find it easier to do it yourself by listening to the noise of the engine as you do it. Hope this helps!