91cooper
03-09-2008, 10:56
Just looking for some help.
I have standard RS2000 hubs on my car and the front track is too narrow. I have now added 10mm spacers. If i were to change to alloy hubs would it push the wheel out further.
Basically are the alloy hubs wider/longer than the RS2000 ones?
Thanks.
1300Sport
03-09-2008, 15:58
Id say adjustable track control arms and eccentric top mounts would be the way to go and leave your hubs standard. I dont know but im reckoning that the alloy ones are the same as standard. www.irishescortclub.com may be some help
fully floating
04-09-2008, 08:24
ring group 4 fabrications in galway they will answer the question about the alloy hubs, they always have time to answer a question.
C.R. motorsport
20-09-2008, 23:10
there is no difference adj t.c.a is what you want
stonemad
21-09-2008, 20:25
My Alloy hubs are 10mm wider than the std ones with no spacers on them! you could also try a different off set-on the wheels, this can bring wheels in or out??;)
My Alloy hubs are 10mm wider than the std ones with no spacers on them! you could also try a different off set-on the wheels, this can bring wheels in or out??;)
Im sure the alloy Group 4 hubs (different studs, bigger bearings & wider) are wider but you do also get an alloy version which is a straight copy of the RS type cast iron hub.