Is there anyone here using a Sadev box in a Citroen C2R2 ???

Theres a friend of mine looking for one for a Peugeot 106 and was wondering if the C2R2 box was the same or similar ? Are they any good ?

Any help greatly appreciated !!

Cheers !
David

They do fit with bit of work and money!!!
contact paul mcgrath he fitted it for us.il pm number if you want

i have used one in a clio and they are very good. really strong box able for a bit of punishment.

i have used one in a clio and they are very good. really strong box able for a bit of punishment.

cud we squeeze one into a nova :laugh:

their de guts of 15 grand tho

heres a 106 wiv sum sorta fancy backy forwardy box!!!!

http://bebo.com/watch/4594817697

their de guts of 15 grand tho

15 grand ??? Euro or Sterling ?

Who supplies them in Ireland or the UK ?

i heard they are about 9k stg - u2u dynotune on here.

the car in the video that flatcrest showed you is of Alan Roddy. His car is prepared by himself and Steven Gault (aka dynotune). Steven is a sound guy and he will tell you all you need to know.

His profile - http://www.rallyforums.com/forum/member.php?u=4666

best of luck mate :)

"this box is compatible with all TU type engines which means it will appeal to all AX, Saxo and C2 owners, as well as to owners of its cousins, the 106 and 206."

Taken from:
http://www.citroen.com/NR/rdonlyres/EF07E7B3-FCC8-40ED-B547-DDD9D54B52A3/47738/CRacingNews01GBprint.pdf

for the other newsletters see:
http://www.citroen.com/CWW/en-US/SearchPage.htm?queryString=C+racing+News&Category=SPORT&nbrResults=8

i put one in my saxo handy enough, cost about 12k euro all in though but they are some box, practically unbreakable

The 5 speed will fit straight in, the 6 spped is much more work- you need to cut the chassis leg on passenger side of car and rebox it in. other mods to heaster box etc for linkage if its RHD. and move power steering pump.

Paul Mcgrath rang us about fitment, we talked him thru it, we have also had Andrew Bushe down looking at installation for his Saxo Kit car.

We can fit it for you if needs arise.

steven i was with paul when he fitted the gearbox he rang you about shorting the driveshafts to which you were no help
if you need work that badly try telling the truth

steven i was with paul when he fitted the gearbox he rang you about shorting the driveshafts to which you were no help
if you need work that badly try telling the truth

Are you on about the 5 or 6 speed box ?

Do the shafts need shortened or how did you get round the problem ?

Cheers !
David

not reallysure about the intent of that ascona when in fact we are giving free advice here and being as we are the first to put a 6 speed in and only the 2nd in british isles we were trying to help by pointing out the pitfalls. No bad intent meant here on our part at all.. as for needing work.. thats just silly, plenty for everyone and if you were every here youd know we are booked in advance.

if you were indeed privy to that conversation then infact we also advised on how to convert the lever from lhd to rhd, how to avoid the heater matrix with mechanism and the chassis leg problem, as well as sorting the flat shift and linking it to ECU.

As for driveshaft lengths- When you buy a box from Sadev (or SWR -the rep) you are supplied with a dummy casing . You remove the springs from the dampers, reassemble and then supply Sadev with full bump and droop lengths for the car so that shaft splines can be set accordingly.

If you buy a 5 speed as per the the kit for C2R2 and are putting it in another car, then you may/may not have length problems.. as it is not something we have done.. we would not advise on solutions. we would rather go on experience rather than heresay.

If anyone is fitting a C2R2 sadev sequential box in anything, I can supply a digital gear display that will work directly off the very unusual sadev magnetic sensor unit.

It's a plug and play unit, all that's required is to plug into the sensor connector on the gearbox and apply 12v to the display box, it comes ready calibrated, nothing to do at all, it just works and not expensive.

The unit is fully developed and tested on my own C2R2 & Sadev box.

If anyones interested please PM me or e-mail me direct at mefmotorsport@btinternet.com or ring me 07837 721986.

Cheers,

Martin

Adrian Mc Elhinney is selling his sadev sequential box from the C2R2 0860800855

Adrian Mc Elhinney is selling his sadev sequential box from the C2R2 0860800855
Is she the 6 speed one?

5 speed out of a c2r2

if fitting a 5 speed box to a 106 cup car will the c2r2 drive shafts work. FOR SALE 106 CUP CAR BOX.

Is she the 6 speed one?

it is a 5 speed... i think there is C2R2 drive shafts with it....

Im looking at fitting the 5 speed box to my 206 cup car will the c2r2 shafts fit???? or can you put the 206 shafts in???? if anyone has any info it would be greatly appreciated

P.M sent

Adrian Mc Elhinney is selling his sadev sequential box from the C2R2 0860800855

is it still for sale?